15-year precision mould making

   With the rapid development of Chinese connector mold parts export, the specific requirements of connector mold parts are increasingly strict: connector mold parts all adopt LKM (LKM) mold and guide pillar must flip (before the mold guide pillar, after die guide sleeve), must have two pieces of pipe pin tube position and lock module between the panel and the  board (locking button), thimble plate must have a guide column.
  Second, the specific requirements of connector mold parts, the general should use hardened materials: LKM2083, LKM2344, LKM2767. generally hardened to 52 - 54HRC.
   Third,he specific requirements of connector mold parts, locating rings up panel 4mm, if there is a heat insulation plate positioning ring to high heat shield 4mm. Sprue arc of common flat and R15.5 two. Sprue arc opening minimum guaranteed diameter 3.5mm. The colliers brass or bronze with graphite wear plate or strip the self-lubricating function. Water plug: adopt HASCO 1/4, BRS and 1/8, BRS two.     
   Forth, the specific requirements of connector mold parts, must have the part name, part number, company name, logo, cavity material identification, Recyclable logo, date stamp. Die surface requirement: Sparkerusion (spark lines), Polished (model Photo etched (province), etch).
   Fifth, the specific requirements of connector mold parts, yize mould specialized in manufacturing precision plastic mold parts and precision plastic mold components.
   The specific requirements of connector mold parts exported to America are strict.But we yize mould can meet the needs to expots to America and Europe.