- Analysis of connector mold parts maintenance skills
- article source： Executive editor：yizemojuma View：2486 Publish time：2014-08-20
Regularly check connector mold parts can prolong the service life of connector mold parts ,analysis of connector mold parts maintenance skills,regular maintenance role for the die life up. Each injection molding position required annual repair procedure, depending on the different connector mold parts cycle. Here are some connector mold parts maintenance skill, can let the user to ensure the effective operation of each connector mold parts hot runner, heater, guide column and connector mold parts, to prevent accidental circumstances.
Check whether the air vent warning rust or moist phenomenon. If you found arusty or humid phenomenon in the vicinity of hot runner exhaust hole, that meansthe internal condensation, or pipe might rupture. Wet phenomenon will lead toshort-circuit heater fatal. If the machine is not all year-round operation, need to be in the evening or weekend shut down, then the condensation probability will be increased.
Remember to remind the operator not to heat the tip clean out at the gate. If the operator happened to see a small piece of stainless steel mold nozzle,connector mold parts maintenance skills,there may be a bit nozzle assembly. Clean out of this seemingly hinder things often destroy the hot tip. So as not to damage the hot nozzle, please confirm before taking action, the hot runner system of nozzle type, and to ensure that all operators will be trained with regularity, to identify your contact with different types of nozzle.
Key words of the article
YIZE mould recommending products
86-769-81888522
